View source for Vacuum Sealers - Using VS200-VS600 Sealers

To use the VS200-VS600 series sealers:
*Lift the unit lid
*Place food or other item in the bag (Do not try to seal fragile foods (breads, chips etc.) in vacuum-sealed bags)
*For proper vacuuming, place the entire open end of the bag into the vacuum channel between the black foam gasket
*Close the lid
*Firmly press down and hold the hand pads located on both sides of the lid of the sealer unit
*The light will turn amber and begin blinking and the unit will make a deep humming sound
*Continue to press down until the sound stops, and the light goes from blinking amber to steady red and then back to green
*Press the release button, then lift the lid and remove the bag
*Let the unit rest at least 20 seconds before using it again


[[File:Bag seal.jpg]]