SL1050 - Food Processor Attachment

Using the Food Processor Attachment
ERROR in secure-include.php::ef_include_get_errors (line 1014)
Cannot open file 'https://spectrum-kb.brandprotectplus.com/articles/SL1050 - Food Processor Attachment/email?sectionId=1'.
NOCACHE

When using the food attachment for the SL1050:

Make sure appliance is OFF and unplugged.
Remove twist-lock ring from food chute mouth by turning clockwise. Carefully remove blade cone.
Choose appropriate blade set for food you will be slicing or shredding. (Note: Use the same 2 blades on each side of cone.)
To place the blades in cone opening, insert the small tabs on base of blade fitting into the bottom of the opening. Push top tab in until blade locks in place.
Insert blade cone into food chute mouth and place twist-lock ring over it. Twist ring counterclockwise to lock ring into place.
Insert food chute assembly into base with the end angled up and to the right (the food chute mouth will be angled down towards counter). Turn the chute assembly counterclockwise until it locks into base and top of chute is pointing straight up.
Place a bowl under chute mouth to catch prepped food.
Cut food to fit inside the chute and place food in the top of the food chute. (Tip: For best results, fill so the food does not spill over. Do not overpack food into chute.)
Switch on the appliance and gently push food down towards the blade using the food pusher.

Note: Always use food pusher to feed food into food chute. Never push food through chute with hands or other objects.

When completed prepping food, switch the appliance to off and unplug it.
Turn the food chute clockwise to unlock and remove off the motor base.
Turn the twist-lock ring clockwise to unlock it, and lift it off the food chute mouth.
Remove the blade cone from the chute mouth and carefully remove each blade by pressing down on the top tab and pulling out away from the cone.
Lift blade out of cone opening, wash and store in the top of the food chute.