Vacuum Sealers - Using VS200-VS600 Sealers

To use the VS200-VS600 series sealers:

• Lift the unit lid
• Place food or other item in the bag (Do not try to seal fragile foods (breads, chips etc.) in vacuum-sealed bags)
• For proper vacuuming, place the entire open end of the bag into the vacuum channel between the black foam gasket
• Close the lid
• Firmly press down and hold the hand pads located on both sides of the lid of the sealer unit
• The light will turn amber and begin blinking and the unit will make a deep humming sound
• Continue to press down until the sound stops, and the light goes from blinking amber to steady red and then back to green
• Press the release button, then lift the lid and remove the bag
• Let the unit rest at least 20 seconds before using it again