Handheld Steamer - Not Enough Steam
Revision as of 14:18, 6 June 2017 by imported>Jackie
Models: HGS205 | HGS200 | HGS310
If the consumer states that the unit is not producing enough steam or no steam is coming out of the steamer:
- Make sure the steamer has been heated to full temperature. - Always allow steamer to preheat at least 45 seconds, or until the power button light is a steady blue.
- Check to see if there is enough water in the water tank. - Follow the instructions under the “filling the water tank” section and fill to Max level marker.
- Advise the consumer to prime the water tank. - After preheating, always prime the water pump by holding the steam trigger until steam forms to ensure enough water is in the boiler.
