SR1000 - How to Use

From Spectrum Brands
Jump to: navigation, search

How to use the SR1000 Tide Buzz!

  • Plug the adaptor into a standard AC household outlet
  • Insert the detachable plug into the underside of the unit
  • Remove the seal on the Tide™ Ultrasonic Cleaning Fluid container opening and insert it into the reservoir with the flat, logo side up
  • Place a disposable, Stain Catcher™ Pad under the garment with the shiny, plastic side away from the fabric
  • Unwind the Buzz™ Wand from the unit
  • Select the appropriate Power Button for your fabric (see chart)
  • Holding the Wand tip directly over the fabric press the Fluid Button and moisten the stained area with liquid
  • While pressing the button, glide wand over stain and apply gentle pressure to fabric
  • You will notice a buzzing noise when operating
  • Apply more Tide™ Ultrasonic Cleaning Fluid to the area as you work out the stain
  • Unit works best when the Wand is held vertically rather than being tilted
  • The Stain Catcher™ Pad will absorb the stain from the fabric
  • Repeat steps 7 and 8 several times while moving the Stain Catcher™ Pad around until the stain is sufficiently removed or you see no further progress
  • Discard used Pad
  • Hold Wand vertically rather than at a slant for best results
  • Move Wand slowly over the stain for optimal stain removal
  • Check for color fastness prior to stain removal
  • Moisten a folded, white paper towel with several drops of Tide™ Ultrasonic Cleaning Fluid
  • Press against hidden area of garment
  • If any dye is absorbed onto paper towel, do not use the Tide™ Buzz™ Ultrasonic Stain
  • Remover on that garment
  • For Heavy Residue Stains such as jam, egg yolk, ketchup, etc.
  • Brush off excess residue
  • Saturate stain with Tide™ Ultrasonic Cleaning Fluid and allow to sit a few seconds to moisten and soften residue
  • Using a dull edge such as a spoon, scrape excess residue toward center of stain and lift off with utensil
  • Remoisten stain and, while pressing the Buzz™ button, glide wand over stain and apply gentle pressure to fabric With some stains on certain fabrics, it is difficult to see if the stain has been completely removed when wet
  • Allow to dry and repeat process if necessary
  • The Tide™ Buzz™ Ultrasonic Stain Remover is designed to remove most stains enough to let you wear garments immediately, after they air dry
  • When it is time to launder clothing, use Tide™ laundry detergent for best results
  • Always follow garment care label instructions