Handheld Steamer - Filling the Water Tan
Models: HGS205 | HGS200 | HGS310
To Fill the Water TAnk
1. Place the steamer on its base on a stable surface.
2. Hold the handle to stabilize and pull out the removable water tank with the other hand.
3. Gently pull out the rubber water tank cover at the top of the tank.
Tip: Using distilled, purified, or filtered water is highly recommended and will reduce mineral buildup. Do not use oils, perfumes, or scented additives.
4. Using a clean measuring cup, pour water into opening until water reaches the “MAX” level mark on the top of the tank. Do not overfill. Close the rubber cover securely.
5. Dry off any excess water from the tank. Push water tank back into the steamer base; click into place.
6. To refill at any time during use, turn steamer off by pressing the power button until the blue indicator light is off, unplug from outlet, and follow the above procedure.
Tip: After refilling, allow to reheat for 45 seconds and then prime pump by holding steam trigger until steam forms.
