Percolator - Doesnt Brew Properly
If the unit is not perking correctly:
- Make sure that the pump tube is not damaged in any way - If the tube is damaged the unit will not operate correctly
- Make sure the washer on the bottom of the pump tube moves freely. If there are coffee grounds that are caught in this area, remove under running water or with a wooden toothpick
- Clean unit with "Dip it" or "Brew Rite" cleaner. Follow the instructions included with the cleaning product. These cleaning products are not manufactured or warranted by Spectrum Home Appliances, Spectrum Brands, Inc., or its subsidiaries or affiliates.
The Washer - There is a washer mechanism located on the bottom of the pump tube. The washer must always move freely. If the washer gets clogged with coffee grounds or has a build up of mineral deposits the unit will not be able to percolate the coffee properly. The coffee grounds can be removed from the washer with a wooden toothpick or by running under water. For cleaning instructions please see the instructional brochure or Click Here for general cleaning information.
The Pump Tube - The pump tube must be properly seated in the percolator or the unit will not work properly. If it is damaged or not positioned correctly, this will make it impossible to pump water. Always make sure that the tube is seated vertically so that it is in the center of the heating unit and that it is not bent/damaged in any way
Please Note: Any of the current percolators will perk the coffee, turn off for a few minutes, and then attempt to perk the coffee a second time. Please treat as a QI.
